Highly efficient, powerful low-frequency loudspeaker fitted with one 10” transducer
Exceptional size-to-power ratio (132.5 dB SPL short-term peak @ 1 m)
Deep, very clean low frequencies – previously available only from much larger cabinets
Flying points (M6 thread) and very low weight
Integrated 700 W EIAJ at 8 ohm (2800 W peak) amplifier module
Description
SUB 110 has been designed for venues where low frequencies are needed but discrete placement is required. The compact nature of this cabinet allows installation within the tightest of places. Based on a dual-port band-pass design and utilising a single 10” drive-unit, the SUB 110 enclosure can faithfully reproduce the lower frequencies down to 39 Hz and up to a peak SPL of 132.5 dB.
Performance
Frequency Response -10 dB
39 Hz – 100 Hz (standard preset)
Suggested Cross-Over
max 120 Hz
Nominal Dispersion
Quasi-Omnidirectional
Impedance (Nom/Min)
8 Ω / 6.1 Ω
Watt AES (Continuous/Peak)
350 W / 1400 W
Maximum SPL Output *
132.5 dB SPL (standard preset)
Physical
Component
1 x 10” – Dual Reflex Band Pass
Connectors
2 x NL4 Pins 1+/1-
Cabinet Material
Baltic birch plywood
Cabinet Finish
Black polyurea coating
Grille
Epoxy powder coated
Installation Points
12 x M6 threaded points
Pole Mount
1 x M20 threaded point
Height
258 mm – 10 1/8”
Width
550 mm – 21 5/8”
Depth
500 mm – 19 5/8”
Weight
21 kg – 46.3 lb
Request an Information
Shtoni komentin tuaj
Adresa juaj e emailit nuk do të publikohet. Fushat e kërkuara janë shënuar *